There’s a 8-million videos about how to mix music, but there’s very little information about how to mix music FOR MEDIA. It’s not easy or intuitive, and there are skills which the pro mixer MUST HAVE in order to get it right. Let’s delve into some reasons why touching that fader is bad for music mixing.
Fader rhymes with Vader. A super awesome tool to get things done fast, but not what you want to use when a

nice cohesive whole that lives in harmony is required. Remember that the real purpose of a fader is to raise or lower the entire frequency spectrum all at once. This is a great tool when every aspect of a sound needs to change, but with music – in particular – it’s super rare when that’s the case.
Certainly, we use faders to place music in a general position where it’ll layer with dialog and the rest of the immersive elements of the project. You’ll want to use faders to have the music feel like it’s in the right place even though it may compete with dialog here-and-there. From there, however, pulling the entire music track up and down with a fader is nearly always the wrong move.
“Mark, you’re nutz. What are we supposed to do then, huh?”
- Do a Music Basic Grade. The same way we do a Dialog Basic Grade as outlined in this article, and as we

Faders are like an axe to your wood-carving mix. outline in depth in the MZed Pro Member Education and in the Mixing Dialog: The Hollywood Secret education in the Cinema Sound Store. You’ve got to get the “bad” frequencies out of the music – those frequencies which interfere with the sound of other important mix elements – before you start layering it.
- Do a Notch EQ on the music so it has less of a chance of interfering with dialog. We also go into that in depth in the MZed Pro Member Education, and we speak about it here in this article. If you can take out of the music the frequencies which are present in the the dialog, you’ve got a great chance of being able to have the music mixed higher and more audience impact had.
- Pan the music wider than in normally would be. Using a plugin like Waves Audio “Stereo Imager” or
iZotope’s “Imager” you can take even mono signals and make them feel wide while retaining general mono compatibility. If you’re in surround certainly NEVER, EVER put music where the dialog is (center channel) spatially, and pan the music into creative panoramic spaces. - Change the instrument balance from within the music using the stems you were provided. You were

Just. Say. No. provided stems, right? If not, get them immediately. Especially if it’s an orchestral score, you’ll definitely want the violas, horns, and bassoons on separate tracks, because they most often combat the baritone voices of male actors.
- Do a combination of 1,2,3 & 4. If things are really not working, I’d suggest reviewing the Basic Grade you did on the dialog itself (you did do a basic grade on the DX first, right?) or perhaps notching the sound effects. And if nothing is working, then you may want to separately EQ or notch specific instruments in the stems which are problematic.
All of these possibilities will allow you to deal with the actual problems of the music which are so often simple frequencies which are too loud here-and-there. And if you’ve experimented with these things and it’s still not working? Well, then, my son, it’s time for you to go to the dark side.
Become a Member of Cinema Sound Free Now!


